Products

Numeric display units
RF30X Series

Application domain

Numeric displays are designed for connection of sensors, processing, storage , transmission and indication of measurement data

Special features

-modular structure offers expandability with unlimited number of connected sensors of any series;
-digital readout (LED or LCD) and light signal indication (rejected/accepted);
-keyboard for data entry and mode/task selection;
-re-programming to meet many-dimensional measurement problems;
-pre-start testing and issue of control commands;
-built-in non-volatile RAM for data storage;
-statistical processing of measurement results;
-connection to PC through parallel and/or serial channels;
-networking capability.

One-coordinate Display Unit, manual (Russian)

.pdf (240 kb)

Monitoring and recording system. SCR-Series

Application domain

Microprocessor systems are designed for real time acquision, processing, storage and indication of data arriving from analog and digital sensors.

Performance specification

Number of channels for analog information input	8
Number of channels for digital information input	8
ADC digital capacity	12
Internal memory capacity, Mb	20
Interface	RS485
Operating temperature range, °С	-40…+50

SCR-1 Series

Application domain

SCR-1 system for coiled-tubing installations The SCR-1 systems have been developed for coiled-tubing installations employed in rehabilitation and maintenance works on oil and gas wells by using long-length coupling-less tubing. The systems perform the following functions:
-registration of tubing weight, hold-down pressure, chain tension force, wellhead pressure, and washover pressure;
-calculation of depth parameters and tube motion speed.

Performance specification

Tube length registration range/increment, m	0…5000/0.1
Tube motion speed registration range/increment, m/s	0…2/0.01
Pressure registration range/increment, MPa	0…25/0.125

The systems are supplied complete with rotation angle sensors, DC/DC voltage transformer, memory modules for data transfer to computer, and data processing software package.

SCR-2 Series

Application domain

The SCR-2 is a distributed network system designed for control of welding process in real time with the purpose of optimization of submerged arc welding parameters. The system performs registration, transmission and computer processing of data coming from sensors installed on welding sets. Control of welding process quality is based on analysis of the following parameters:
-arc welding voltage;
-arc welding current;
-welding head speed;
-welding wire feed speed;
-weld joint temperature.

Performance specification

Number of welding set under control	up to 8 (or to customer’s order)
Measurement range of arc voltage, V	0…100
Measurement range of arc current, A	0…500
Measurement range of welding temperature, °С	0…1000
Measurement range of welding head speed, m/hr	0…500
Measurement range of welding wire feed speed, m/hr	0…100